中国一级代理【广州★兰瑟★电子】长期供应美国Transcell SBS-10T称重传感器,质量优秀,价格优惠供应。销售经理:万显灿(先生)电话:020-22153517 QQ:1410957948 传真:020-39133900 手机:15889960360
美国Transcell SBS-10T
The Q60LAF sensor is a full-featured adjustable-field sensor. These adjustablefield
sensors are able to detect objects of relatively low reflectivity, while ignoring
other objects in the background (beyond the cutoff point). The cutoff distance is
mechanically adjustable, using the 2-turn adjustment screw (Figure 1). A rotating
pointer indicates the relative cutoff position. (The indicator moves clockwise to show
increasing distance.) The collimated laser emitter produces a small, bright spot,
allowing easy alignment and precision sensing of relatively small objects at long
range.
Two push buttons (ON Delay and OFF Delay) are used to set the output delay options,
to toggle between light and dark operate modes and to lock out the push buttons for
security purposes. For 10 to 30V dc models, these functions also may be accomplished
using the remote wire.
Seven LED indicators show, during RUN mode, the sensor configuration and
operating status. During Delay Configuration, 5 of the LEDs combine to form a single
light bar that indicates relative ON or OFF delay time.
【★优惠】美国Transcell SBS-10T Load Cell
CR-5kg CR-20kg CR-50kg CR-100kg CR-200kg CR-500kg CR-1T CR-2T CR-3T CR-5T SBS-10T BSS-100kg BSS-200kg BSS-250kg BSS-500kg BSS-750kg BSS-1000kg BSS-1T BSS-1.5T BSS-2T BSS-2.5T BSS-5T BSS-1500kg BSS-2000kg BSS-2500kg BSS-5000kg BSS-100kgSS BSS-1TSS ESH BSS-250kgSS ESH BSS-500kgSS ESH BSS-5TSS BSS-ESH-100kg BSS-ESH-200kg BSS-ESH-250kg BSS-ESH-500kg BSS-ESH-750kg BSS-ESH-1000kg BSS-ESH-1T BSS-ESH-1.5T BSS-ESH-2T BSS-ESH-2.5T BSS-ESH-5T BAB-5MT BAB-7.5MT BAB-10MT BAB-15MT BAB-20MT BAB-30MT BAB-50MT BAB-75M BAB-100M BSA-25kg BSA-50kg BSA-250LB TSB-150LB JB-SS BOX接线盒
Adjustable-Field Sensing – Theory of Operation 美国Transcell SBS-10T
The problem, though, is that most wireless sensors use too much power, which means that their batteries either have to be very large or get changed far too often. Add to that some skepticism about the reliability of sensor data that's sent through the air, and wireless sensors simply haven't looked very appealing.
美国Transcell SBS-10T
Application of sodium diacetate and analysis of industrialized production.
The industrial - scale process of high purity propane for micro - electronic industry.
FSSV-1000kg SBS-ESH-250kg SBS-ESH-500kg SBS-ESH-1t SBS-ESH-1.5t SBS-ESH-2t SBS-ESH-5t SBS-ESH-7.5t SBS-ESH-10t FAK-3kg FAK-6kg FAK-10kg FAK-12kg FAK-15kg FAK-20kg FAK-25kg FAK-30kg FAK-35kg FAK-40kg FAK-45kg FAK-60kg FAK-120kg FAK-150kg FAK-200kg
Adjustable-Field Sensing – Theory of Operation
美国Transcell SBS-10T
BSS-100kg BSS-200kg BSS-250kg BSS-500kg BSS-750kg BSS-1000kg BSS-1T BSS-1.5T BSS-2T BSS-2.5T BSS-5T BSS-1500kg BSS-2000kg BSS-2500kg BSS-5000kg BSS-100kgSS BSS-1TSS ESH BSS-250kgSS ESH BSS-500kgSS ESH BSS-5TSS BSS-ESH-100kg BSS-ESH-200kg BSS-ESH-250kg BSS-ESH-500kg BSS-ESH-750kg BSS-ESH-1000kg BSS-ESH-1T BSS-ESH-1.5T BSS-ESH-2T BSS-ESH-2.5T BSS-ESH-5T BAB-5MT BAB-7.5MT BAB-10MT BAB-15MT BAB-20MT BAB-30MT BAB-50MT BAB-75M BAB-100M BSA-25kg BSA-50kg BSA-250LB
In operation, the Q60LAF compares the reflections of its emitted light beam (E) from
an object back to the sensor’s two differently-aimed detectors R1 and R2 (see
Figure 2). If the near detector (R1) light signal is stronger than the far detector (R2)
light signal (see object A, closer than the cutoff distance), the sensor responds to the
object. If the far detector (R2) light signal is stronger than the near detector (R1) light
signal (see object B, object beyond the cutoff distance), the sensor ignores the object.
The cutoff distance for Q60LAF sensors is adjustable from 200 to 1400 mm
(8" to 55") for Class 1 laser models, and 200 to 2000 mm (8" to 80") for Class 2 laser
models. Objects lying beyond the cutoff distance are ignored.
美国Transcell SBS-10TIn the drawings and discussion on this page and page 4, the letters E, R1, and R2
identify how the sensor’s three optical elements (Emitter “E”, Near Detector “R1”,
and Far Detector “R2”) line up across the face of the sensor. The location of these
elements defines the sensing axis (see Figure 3). The sensing axis becomes important
in certain situations, such as those illustrated in Figures 7 and 8.